kailansen
Insulated Glass Unit Construction Analysis: Detailed Explanation of the Spacer and Sealing Process

Insulated Glass Unit Construction Analysis: Detailed Explanation of the Spacer and Sealing Process

  • Thursday, 11 June 2026
  • 0
  • 214
  • 0

When it comes to energy-efficient windows, Insulated Glass Units (IGUs) – commonly known as double-glazing or triple-glazing – are the core technology. Understanding how an IGU is constructed, especially the spacer system and sealing process, is critical for architects, contractors, and glazing professionals. In this in-depth blog post, we break down every layer of IGU construction and explain why high-quality manufacturing matters.

As a source factory, Kailansen  specializes in producing premium insulated glass units with strict quality control and competitive direct pricing. Let’s dive into the anatomy of an IGU.


What Is an Insulated Glass Unit?

An insulated glass unit consists of two or more glass panes separated by a spacer and hermetically sealed to create an insulating air or gas-filled cavity. The key components are:

  • Glass panes (clear, low-E, tempered, laminated, etc.)

  • Spacer bar (aluminum, warm edge, or stainless steel)

  • Desiccant (moisture-absorbing material inside the spacer)

  • Primary sealant (typically butyl sealant)

  • Secondary sealant (polysulfide, silicone, or structural sealant)

  • Gas fill (argon, krypton, or air)

Each component must work perfectly together. Even a minor defect in the sealing process can lead to fogging, condensation between panes, and total failure of the IGU.


Part 1: The Spacer – Heart of the Cavity

The spacer determines the width of the air layer (or gas-filled layer) and provides mechanical separation between glass panes. Common spacer types include:

1.1 Aluminum Spacer (Traditional)

  • High strength, low cost

  • Higher thermal conductivity (creates a thermal bridge, reducing energy efficiency)

1.2 Warm Edge Spacer (Modern)

  • Made from stainless steel, foam, or composite materials

  • Low thermal conductivity – improves overall U-value by reducing heat loss at the edge

  • Examples: TPS (Thermoplastic Spacer), super spacer, or stainless steel with plastic hybrid

1.3 Desiccant inside Spacer

The hollow spacer bar is filled with molecular sieve desiccant (typically 3A or 4A zeolite) to absorb residual moisture inside the sealed cavity. This prevents internal fogging and maintains clarity for years.

Key term: <strong>Spacer thickness</strong> – Common sizes: 6mm, 9mm, 12mm, 15mm, 20mm. Larger cavities offer better insulation, but beyond 20mm, convection currents reduce efficiency.

1.4 Gas Fill – Why Argon or Krypton?

The gas layer replaces dry air with a denser gas to reduce conductive and convective heat transfer.

  • Argon – most common, cost-effective, 34% less conductive than air

  • Krypton – better performance for thinner cavities (e.g., 8mm-10mm), but more expensive

  • Air – acceptable only for non-energy-critical applications

At Kailansen, we offer customizable spacer types and gas fill options based on your project’s thermal requirements (U-value, SHGC). As a source factory, we can produce IGUs with argon concentration up to 90% for maximum insulation.


Part 2: Sealing Process – The Make-or-Break Step

The sealing system is what turns two glass panes and a spacer into a durable, long-lasting IGU. There are two main sealing lines: primary seal and secondary seal. Together they provide hermeticity (gas-tightness), structural strength, and moisture resistance.

2.1 Primary Seal – Butyl Sealant

<strong>Butyl sealant</strong> is applied to both sides of the spacer before the glass panes are pressed together. It forms the first barrier against moisture and gas leakage.

  • Hot melt butyl (thermoplastic) is commonly used in automated IGU lines.

  • Characteristics: extremely low moisture vapor transmission rate (MVTR), excellent adhesion to glass and spacer.

  • Failure risk: If the butyl strip is interrupted or has poor adhesion, the IGU will lose gas fill within months.

2.2 Secondary Seal – Structural & Environmental Protection

The secondary seal surrounds the outer edge of the spacer, bonding the two glass panes and protecting the butyl from UV, mechanical stress, and weathering. Common materials:



Sealant TypeProsCons
PolysulfideExcellent moisture resistance, flexibleSlow cure, lower strength
SiliconeSuperior UV resistance, structural strength (ideal for curtain walls)Higher gas permeability – not recommended for argon-filled IGUs alone
Hot Melt Butyl (single-seal system)Fast, very low gas permeabilityLess structural strength, not suitable for large or load-bearing units
Structural Glazing SealantHigh strength for frameless applicationsRequires careful surface preparation

For high-performance IGUs, the industry standard is dual-seal construction: butyl primary + polysulfide or silicone secondary. At Kailansen, we use fully automated double-seal production lines to ensure consistent edge seal quality.

2.3 Key Sealing Quality Indicators

  • No voids or bubbles in the secondary seal – inspected via automatic vision systems

  • Proper curing time for silicone/polysulfide (24-48 hours before handling)

  • Gas retention test – Spark emission spectroscopy or GC (gas chromatography) to verify argon fill level even after sealing

<strong>Important note</strong>: A poorly sealed IGU can lose up to 1% of its gas fill per year. High-quality sealing from a source factory like Kailansen reduces that to less than 0.1% annually.


Part 3: Why Choose a Source Factory for IGU Supply?

Many glass distributors and window manufacturers buy IGUs from trading companies, which adds 15–30% markup. By working directly with a source factory like Kailansen (铠澜森), you gain:

3.1 Direct Pricing & Volume Flexibility

  • No middleman markup – pay factory-direct rates

  • Low MOQ (minimum order quantity) for custom sizes – from 100 sqm to 10,000 sqm

3.2 Strict Quality Control (QC)

  • In-house raw material testing (glass, spacer, desiccant, sealants)

  • 100% online inspection for seal integrity, gas concentration, and optical distortion

  • ISO 9001:2015 certified production process

3.3 Customization Options

  • Any glass combination: Low-E, tempered, laminated, fire-rated, acoustic PVB

  • Spacer color: silver, black, bronze, or custom RAL

  • Gas fill: air, argon, krypton, or mixed gas

  • Special shapes: non-rectangular, curved, step-type IGUs

3.4 Fast Lead Times & Global Shipping

As an integrated factory, Kailansen maintains stock of raw materials and can deliver standard IGUs within 7–15 working days. We package units with edge protectors and anti-slip wooden crates for export.


Part 4: Technical Specifications – What to Look For in an IGU

When sourcing insulated glass, request the following data from your supplier:



ParameterTypical ValueHigh-Performance Value (Kailansen)
Spacer width6mm–20mm6mm–20mm (any custom)
Gas fill concentration85% argon>90% argon (guaranteed)
Moisture vapor transmission rate (MVTR)<0.5 g/m²/year<0.1 g/m²/year
U-value (center of glass)1.1–1.4 W/m²K (double low-E)0.7–1.0 W/m²K (triple low-E + krypton)
Gas retention (after 10 years)>80%>95%
Sealant typeDual-seal (butyl + silicone)Dual-seal (butyl + polysulfide for argon)

These metrics directly impact building energy codes (LEED, Passivhaus, Energy Star). Kailansen can provide test reports from third-party labs (e.g., SGS, TÜV) for gas retention and thermal performance.


Common IGU Failure Modes – And How a Source Factory Prevents Them

  1. Fogging between panes → Caused by desiccant saturation or seal failure.
    Prevention: Kailansen uses molecular sieve desiccant with high water absorption capacity (≥22% by weight) and vacuum-dried spacer filling.

  2. Argon gas loss → Due to micro-leaks in butyl or secondary seal.
    Prevention: Automated sealant application with precise pressure control + 24-hour leak testing.

  3. Edge seal delamination → Poor adhesion from dirty glass edges.
    Prevention: Washing glass with deionized water and plasma treatment before sealing.

  4. Thermal stress cracks → Mismatched spacer expansion with glass.
    Prevention: Using warm edge spacers with thermal expansion coefficients matched to glass.


Conclusion: The Kailansen Advantage

Understanding insulated glass unit construction – from the spacer and gas fill to the critical dual-seal process – helps you make informed purchasing decisions. Whether you need IGUs for residential windows, commercial curtain walls, or passive house projects, the quality of the spacer and sealing directly determines lifespan and energy savings.

As a source factory, Kailansen offers:

  • Transparent factory-direct pricing

  • Fully automated IGU lines with dual-seal technology

  • Customizable spacer types, gas fills, and glass configurations

  • Certified gas retention and moisture resistance

Ready to source high-performance insulated glass? Contact our team for a quote, sample, or technical drawing support. We speak glazing.

Contact Kailansen – Your reliable source factory for IGUs.
📧 Email: liuw4458@gmail.com
🌐 Website: https://www.kailansen.com/
🏭 Factory location: China (direct visits welcome)

0users like this.

Leave a Reply

Blog Categories
New
Blog Tag
RSS

Get in touch

Refresh Code